Disposer work divides into what can be cleared and what has to be replaced. Jams, tripped overloads, blocked drain lines and loose dishwasher connections are all straightforward. A failed internal seal or a worn bearing is not, and we are direct about that rather than selling labour on a unit that will leak again.
Safety governs everything here. The wall switch and the breaker are both off and proven dead before anything is touched, and nothing goes into the grinding chamber by hand at any point. We also check the trap and the drain line while we are under there, because a disposer blamed for slow draining is often working perfectly into a partly blocked pipe.
Common Garbage Disposal Problems
Humming under the sink without the plate turning
Dead with no sound at all when switched on
Cutting out part-way and needing a reset
Water dripping from the body or the sink flange
Metallic rattling that started suddenly
Draining slowly even when the unit runs normally
Why Trust Us With Your Maytag Garbage Disposal
- Measured, Not Guessed | The suspect garbage disposal component goes on a meter and is shown to have failed before we recommend replacing it.
- Common garbage disposal Parts Aboard | The parts that fail most often travel with the technician; anything rarer is ordered on the spot and the return visit booked before we leave.
- Isolated Before Anything Opens | The supply to your garbage disposal - power, water or gas - is shut off and proven dead before a panel moves, and high-voltage and sealed-system circuits stay with the technician.
- Coverage Checked First | Where your garbage disposal looks like it may still sit inside manufacturer coverage we flag it before quoting, because work by anyone other than an authorized technician can put that coverage at risk.