Filtration and softening equipment sits between the house supply and everything downstream, so faults present in ways that look like plumbing problems: pressure loss, weeping fittings, taste and odour complaints, and equipment that has silently stopped cycling.
We isolate the unit, relieve the pressure and work from the supply side inward – housings, O-rings and seats, heads and bypass valves, the cartridge itself and, where fitted, the controller that runs the regeneration schedule. Where the real fault turns out to be in the house plumbing rather than the appliance, we say so rather than replacing parts that were never the problem.
Common Water Filtration System Problems
Flow slowing noticeably since the last cartridge change
Taste or odour returning between service intervals
Water seeping from a housing, head or fitting
Cartridge difficult to seat, or leaking once seated
System no longer regenerating or cycling on schedule
Pressure dropping across the whole house when it runs
Why Trust Us With Your Maytag Water Filtration System
- Measured, Not Guessed | The suspect water filtration system component goes on a meter and is shown to have failed before we recommend replacing it.
- Common water filtration system Parts Aboard | The parts that fail most often travel with the technician; anything rarer is ordered on the spot and the return visit booked before we leave.
- Isolated Before Anything Opens | The supply to your water filtration system - power, water or gas - is shut off and proven dead before a panel moves, and high-voltage and sealed-system circuits stay with the technician.
- Coverage Checked First | Where your water filtration system looks like it may still sit inside manufacturer coverage we flag it before quoting, because work by anyone other than an authorized technician can put that coverage at risk.