What F0E7 Means
F0E7 is not a fault. The Clean Washer cycle was started with laundry still in the drum. That cycle runs hot with a tub cleaner and is designed to run empty, so the control stops rather than washing clothes in it.
Common Causes of F0E7
- Laundry left in the drum when Clean Washer was selected
- A towel or sock caught under the agitator or in the door seal
- Load-sensing circuit misreading an empty drum
🔧 One Safe Check You Can Try
Open the door or lid and take everything out, including small items hiding under the agitator or tucked into the door seal on a front-load machine. Close it again and restart the Clean Washer cycle empty, with the tub cleaner or the measure of bleach your manual specifies. If the drum is genuinely empty and the code still appears, the load-sensing circuit is reporting weight that is not there, which is a control-side fault worth diagnosing.
⚠ Why You Shouldn't Go Further Than That
- None - emptying the drum is ordinary use.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.