What F56 or F60 Means
Maytag gives F56 and F60 the same published attribution on electric and induction cooktops: a possible problem with the user interface touchpad or the associated wiring. These point at the panel you touch rather than at the elements or the power board.
Common Causes of F56 or F60
- Contamination affecting the touch panel
- Touchpad harness connector loose
- Touchpad failed
- Wiring heat-damaged under the glass
🔧 One Safe Check You Can Try
Clean and dry the touch panel first - it costs nothing and rules out the simplest cause, since contamination affects how a touchpad reads. Then reset at the breaker for a minute and test a zone on low. If the code returns on a clean cold panel, the touchpad or its harness needs replacing. Note any keys that have stopped responding, because a panel with one dead key and one where nothing works suggest different parts.
⚠ Why You Shouldn't Go Further Than That
- Clean only when the glass is cool, with a cloth wrung out rather than wet.
- The touchpad harness runs under the glass on a high-current circuit.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.