What FC E6 or FC E9 Means
FC E6 and FC E9 are published as a possible problem with the wireless power module or the associated wiring, again with a one-minute power cycle at the breaker as the published remedy. These are the power supply side of the connectivity hardware.
Common Causes of FC E6 or FC E9
- Transient fault cleared by a power cycle
- Module connector loose
- Wiring to the module damaged
- Wireless power module failed
🔧 One Safe Check You Can Try
Switch the range off at its breaker for one minute, restore power, and verify operation. If the code persists, the module needs replacing, and that is a technician job behind the console. None of this affects the oven or the cooktop, so there is no urgency unless you rely on the connected features. Note whether the code appears every time the range is powered up or only occasionally.
⚠ Why You Shouldn't Go Further Than That
- The module sits behind the console beside mains terminals.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.