What F7 E0 or F7 E1 Means
Maytag publishes F7 E0 as a possible problem with the oven door latch assembly or the associated wiring, and F7 E1 as a possible problem with the door switch or the associated wiring. The pair splits the door hardware between the latch that locks it and the switch that reports its position.
Common Causes of F7 E0 or F7 E1
- Door switch failed
- Latch assembly jammed or failed
- Door not closing square
- Debris in the latch path
- Wiring to the door hardware damaged
🔧 One Safe Check You Can Try
Let the cavity cool if the door is locked, then press cancel to clear the code, then switch the range off at its breaker for a minute, restore power, and start a bake cycle to see whether it returns. Open and close the door a few times and watch the oven light, since on many ranges the same switch controls it - a light that does not respond to the door is a strong clue for the F7 E1 reading. Check nothing obstructs the latch path. Never force a locked door.
⚠ Why You Shouldn't Go Further Than That
- A range runs on a high-current circuit and its control sits behind a panel with live terminals.
- Never force a locked oven door.
- Let the cavity cool completely before reaching inside; a recently used oven stays hot for a long time.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.