What 1c31, 1c32, 1c4c, 1c6c, 1c7c, 1c81, 1c82 or 1c8c Means
This block of 1c codes is published with one shared attribution: a possible problem with the oven control or the associated wiring. Maytag gives no separate cause for any of them, so they are documented together rather than as eight near-identical entries.
Common Causes of 1c31, 1c32, 1c4c, 1c6c, 1c7c, 1c81, 1c82 or 1c8c
- Transient control fault cleared by a reset
- Control connector loose
- Wiring behind the console damaged
- Oven control board failed
🔧 One Safe Check You Can Try
Press Cancel to clear the code, then switch the range off at its breaker for a minute, restore power, and start a bake cycle to see whether it returns. If the range works normally afterwards, the fault was transient. If any of these returns, the oven control needs testing. Write down exactly which code appeared - the suffix means something in the service documentation even though the customer-facing pages give them one shared meaning, so getting the characters right is worth the care.
⚠ Why You Shouldn't Go Further Than That
- A range runs on a high-current circuit and its control sits behind a panel with live terminals.
- On a gas range the burner and the gas connection share the space behind the console with the wiring.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.