What F7E2 Means
Maytag names F7E2 as a wash motor error and states plainly that if the code returns after a power cycle, service should be scheduled. The wash motor drives the spray arms; without it the dishwasher fills and drains but never actually washes.
Common Causes of F7E2
- Spray arm jammed by debris
- Filter blocked, starving the pump
- Wash motor or its capacitor failed
- Wiring to the motor damaged
- Control not driving the motor
🔧 One Safe Check You Can Try
Reset the control by removing power for thirty seconds - unplug the machine or switch off its breaker - then restore power and run a short cycle. Before you run that test, pull out the lower rack and turn each spray arm by hand - they should spin freely. Lift out the filter in the sump and rinse it, and look for anything jammed where the arm pivots, such as a fruit sticker or a fragment of glass. If the arms are clear and the code returns, follow the published advice and book service rather than running more cycles.
⚠ Why You Shouldn't Go Further Than That
- The wash motor is mounted under the tub on mains wiring, and reaching it means pulling the dishwasher out of the cabinet with the water supply disconnected.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.