What F3 E2 Means
F3 E2 is published as a possible problem with the oven temperature sensor, the warming drawer sensor if the range is so equipped, or the associated wiring. The warming drawer has its own sensor, which is why it appears in this code and not in the others.
Common Causes of F3 E2
- Oven temperature sensor failed
- Warming drawer sensor failed
- Sensor connector loose
- Wiring damaged behind the range
🔧 One Safe Check You Can Try
Press Cancel to clear the code, then switch the range off at its breaker for a minute, restore power, and start a bake cycle to see whether it returns. Then test the two independently: bake something in the oven and separately run the warming drawer, and note which one misbehaves. That single observation tells the technician which sensor to bring, and it is the sort of thing that turns a two-visit repair into one. If your range has no warming drawer, say so, because it removes half the code straight away.
⚠ Why You Shouldn't Go Further Than That
- A range runs on a high-current circuit and its control sits behind a panel with live terminals.
- Let the cavity cool completely before reaching inside; a recently used oven stays hot for a long time.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.