What Flashing F Means
Maytag treats a flashing F on the refrigerator display as an error indication and gives a direct answer: try resetting the refrigerator, and if the problem persists, schedule service. It also asks you to make sure the cooling function is switched on, since a refrigerator in Cooling Off mode will not behave as expected.
Common Causes of Flashing F
- Transient control fault cleared by a reset
- Cooling function switched off
- Sensor or control fault requiring diagnosis
- Supply voltage disturbance
🔧 One Safe Check You Can Try
First confirm cooling is actually on, because that is Maytag's own opening check and it costs nothing. Then reset the refrigerator by removing power - unplug it or switch off its breaker - wait a few minutes, and restore it. Give the compartments several hours to return to temperature before judging the result, and check the food with a thermometer if it has been warm. If the F returns after the reset, the published advice is to schedule service, and that is where it should go.
⚠ Why You Shouldn't Go Further Than That
- Maytag directs this code to service if a reset does not clear it.
- The control board is behind a mains-connected panel.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.