What L2 or F4E4 Means
Maytag documents L2, and the matching F4E4, as low or no line voltage: there may be a problem with the household power supply that is keeping the dryer heater from turning on. The dryer keeps running and the drum turns, but without heat the load simply tumbles damp. Maytag also notes this error typically shows during initial installation.
Common Causes of L2 or F4E4
- One of the two household breakers tripped or one fuse blown
- Power cord not correctly installed at the terminal block
- Loose or corroded connection in the supply
- Genuine low voltage at the property
🔧 One Safe Check You Can Try
An electric dryer runs on two household fuses or breakers, and this code is what you see when one of them has gone while the other is still live - the motor runs on one leg, the heater needs both. Check the consumer unit for a tripped breaker or a blown fuse and reset or replace it. Confirm the power cord is properly installed at the terminal block if the machine was recently connected. Then select a timed heated cycle and restart. If the code persists after that, Maytag advises consulting a qualified electrician rather than continuing to reset it, and that is the right call - this is a supply problem, not a dryer fault.
⚠ Why You Shouldn't Go Further Than That
- The dryer terminal block and the supply are mains-voltage work that should be left to a qualified electrician.
- Resetting a breaker that trips again immediately is a sign of a fault, not a nuisance trip.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.